Our caps are mechanically tightened and we don’t recommend trying to remove them. Your first order of 5 gallons or more comes with a spout. If you need another you can order one.
- Flathead Screwdriver
Position the screwdriver over the center of the cap. Give it several good whacks with a hammer until you puncture a hole in the center of the top.
The hole only needs to be big enough for alcohol to flow. You do not need to remove the entire center of the cap.
Screw the spout into the cap. Hand tighten the cap, and then adjust the spout to the correct position. For faster flow, slightly open the small cap (opposite the larger cap) to allow venting and then tighten the small cap when not in use.
Turn the spout forward to open.
Turn it to the right or left to close.
Store upright to prevent leakage.